Business Type:
Manufacturer/Factory
Establishment:
2012
R&D Capacity:
ODM, OEM, Other
OEM/ODM Service
Sample Available

Data Logger, Temperature Recorder, Temperature Data Logger manufacturer / supplier in China, offering Pdf Single Use Temperature Data Logger, Pdf Temperature and Humidity Data Logger with LCD, Ec-770 F/N Coating Thickness Gauge 1~3% Accuracy 1500um 5000um and so on.

1
    YRS
General Supplier

5000um Separate Probe Zinc Coating Thickness Gauge

Get Latest Price
Min. Order / Reference FOB Price
10 Piece US $72.00/ Piece
Local Area: Shenzhen, Guangdong, China
R&D Capacity: OEM, ODM, Other
Payment Terms: LC, T/T, PayPal
Sensor Probe Type: Fe / Nfe Probes
Measurement Range: 0 to 1300um (0 to 51.2mils)
Measuring Mode: Single and Continuous
5000um Separate Probe Zinc Coating Thickness Gauge
EC-770/EC-770E/EC-770S
These gauges can measure up to 5000um coating thickness. It is used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paintand anodizing coatings on non-ferrous metals.

· 128*128 dot matrix LCD display, standard menu operations
· Two measure modes: single and continuous
· Two group modes: direct (DIR) and general (GEN), readings will be lost when power off in direct mode, and not be lost in general mode. 80 readings can be stored for each group
· Zero point calibration and multi-point calibration (up to 4 points) for each group
· User can recall, delete specified readings, or delete group readings
· Statistics display: mean, minimum, maximum and standard deviation
· Three probe modes: auto, magnetic and eddy current
· User can set a high or low alarm limit for each group
· Power off automatically
· USB interface to data transmission
· Low battery and error indication

·metalwork·Automobile Works·Used Car Market
·Foil Manufacturer·Industrial Lacquer·Paper Mill
ModelEC-770xEEC-770xFEC-770XNProbeF-Probe & N-ProbeF-ProbeN-ProbeMeasuring PrincipleMagnetic induction & Eddy CurrentsMagnetic inductionEddy CurrentsMeasuring Range0 to 5000 um Accuracy± (2%+1 um)Resolution0 um~999 um(1 um) 1000 um~5000 um(0.01 mm)
0 mils~39.39 mils(0.01 mil) 39.4 mils~51.2 mils(0.1 mil)CalibrationOne point to four point calibration, zero point calibrationData GroupOne direct group(readings not be stored to memory)
Four general groups(readings will be stored automatically)
NOTE: each group have individual statistics, alarm limit settings and calibrationStatisticsNo. of readings, mean, minimum, maximum and standard deviationUnitsum, mm, milAlarmUser can set the high/low alarm limit;Alarm icon displayed on LCD when over the limitMinimum Curvature Radius Convex1.5 mmMinimum Curvature Radius Concave25 mmMinimum Measuring AreaDiameter 6 mmMinimum Thickness Of SubstrateF-probe: 0.5 mm(0.02");N-probe: 0.3 mm(0.012")0.5 mm(0.02")0.3 mm(0.012")Maximum Measuring RateTwo readings per secondComputer InterfaceDownload data via USBPower SupplyTwo 1.5 V AAA batteryOperation EnvironmentTemperature: 0 to 40°C(32 to 104°F); Humidity: 20% to 90%RHStorage EnvironmentTemperature: -20 to 70°C(-4 to 158°F)Standard CertificationROHS; WEEE;CEDimensions110 mm*53 mm*24 mm(4.33"*2.09"*0.94")Case Material And WeightABS; 92 g

1. Is the measuring error large?
• Enter the menu interface, clear the calibration data; shut down to restore the factory configuration steps; do zero calibration after booting, (Note: you need to dozero calibration on the customer's own substrate)2. Does the measurement screen display overflow?
• The coating thickness exceeds the measurement range.
• There is an error and zero calibration is required on the substrate.
• Probe fault3. Measurement no response?
• Check if the battery has power.
• The probe has a fault.
• Whether the measured material meets the measurement principle. 4. Does the measurement show a negative number?
• It is judged according to the customer's materials whether the machine accuracy is applicable.
• The calibration did not do well and needs to be recalibrated.5. During the measurement process, is it sometimes display F, sometimes display N?
• The automatic mode undistinguishable the type of material and it requires manual switching of the measurement principle.6. How to do calibration?
• Please refer to the zero calibration, point calibration step.7. Long press "ZERO" does not respond?
• You need to restore the factory settings and then operate.8. It can measurement but there is no reading, why?
• Confirm whether the mode is in continuous measurement mode
• Check if the beep is broken

From raw materials to final products, we have a strict quality control system. Our defective rate is about 0.1%. Our staff is well-trained and educated in this industry, we will save money in the end because of our efficiency and know-how. We have been in business for 10 years and thanks to our R&D department, we always catch the latest trend in the market. With the required certificate and experience after-sales service, there was no issue in the shipment we have arranged. We have rich experience in handling orders for heavy buyers with the professional process.• Stable raw material purchasing
• Favorable order follow-up management
• Laudable lead-time & shipment control
• Traceable quality evaluation
• Flexible payment terms
• Remarkable after-sale service
6. Innovative testing technology isalways pursued and to do.
• We are first to create the LED display rotated and red backlight alarm in the world.
• We are the first one create menu operations for coating thickness gauges in China.
• Software: Dgraph can be so easily used to set up, download data, view graph and output reports.