Gasoline Driven Corn Processing Machine/Corn Sheller and Corn ThresherIntroduction
1.four shaft level among decorate, add cent, reduce the material Angle steel dehusker process of corn is invalid stay;
2 the initiative in bold screw axis, stripping efficiency, and stripped clean rate is high
3.four shaft axis tube, and improve the bold the strength of the shaft, and to reduce the blade grain for the axis of the bending deformation
4.high wear-resisting rubber roller, completely through the steel nails in the shaft, not tighten appear roll;
5.eight bearing can through the note oil hole remove the oil from and improve the service life of the bearing;
6.driving shaft adopt bevel gear transmission design, low noise, transmission torque;
7.driven pulley USES the steel plate molding design, a cast iron pulley toughness, good life and high;
8.the best corn skinning machines can be very convenient and intertillage machine connected to use the incentive to gasoline engine intertillage machine operation, you can save the cost 500 yuan, and from the motor power limitations, but in the field in the operations..
Specification
ModelAM-660Power 3KW, 220V,1400rpmProductivity 1000-2000kg/hmoisture content 18-22%Overall dimension1850*650*500mmWeight 108kgPeeling roll length1000mmPeeling roll diameter 75mmRotary speed of peeling roll340-800rpmCorn damage rateLess than 2%Peeling rateMore than 95%PowerElectric motor, engine etc.Temperature of motorLess than 40°CTemperature of bearingLess than 65°CLoss rateLess than 1%Feeding quantity6.5-8kg/s